Precision Tune-Ups

PRECISION AIR-CONDITIONING TUNE-UP BENEFITS

  • Lower utility bills by reducing energy consumption and waste
  • Extended equipment life
  • Peace of mind for you and your family
  • Fewer repairs, and improved system reliability
  • Increased cooling capacity and efficiency

 

OUR EXCLUSIVE PRECISION A/C TUNE-UP PROCEDURE INCLUDES, AS NEEDED:
  • Chemically clean and thoroughly wash condenser coil(s).
  • Thoroughly clean or replace standard air-filter(s).
  • Lubricate motor and fan bearings, as well as other moving parts as necessary.
  • Clean and inspect evaporator coil and drain pan when readily accessible.
  • Clean and inspect condensate drain lines and fittings.
  • Clean, level, and calibrate thermostat.
  • Adjust and thoroughly clean blower motor and fan assembly as needed.
  • Inspect, tighten and test all electrical connections; this includes disconnect switch.
  • Inspect all cooling system electrical wires, connectors and terminals.
  • Test system starting and running capacitors.
  • Test all controls, switches, relays, transformers, contactors, motors and fans.
  • Measure starting and running amperes, line voltage and control voltage.
  • Test system-starting capabilities.
  • Test system for proper airflow and air delivery.
  • Inspect and adjust all safety controls.
  • Monitor refrigerant (Freon) pressures and temperatures.
  • Test and record super-heat and sub-cooling; compare with factory specifications.
  • Test and measure air-conditioning system for proper production and capacity.
  • Monitor fan motors and compressor operating temperatures.
  • Apply weather resistant protective coating to the outside unit. (Condenser)
  • Complete and present full written report.

 

PRECISION FURNACE TUNE-UP BENEFITS

  • Lower utility bills
  • Extended equipment life
  • Fewer repairs, breakdowns, and improved system reliability
  • Peace of mind for you and your family
  • Increased heating capacity
  • Priority service scheduling

 

OUR EXCLUSIVE PRECISION FURNACE TUNE-UP PROCEDURE INCLUDES, AS NEEDED:
  • Inspect and tighten all electrical connections and terminals.
  • Remove, clean, and adjust main gas burners.
  • Remove, clean, and adjust ignition/pilot assembly.
  • Thoroughly brush and vacuum clean the heat-exchanger(s) and combustion chambers.
  • Inspect heat-exchanger(s) and combustion chambers for cracks, rusting, or problem areas.
  • Vacuum out blower compartment; return airdrop, and surrounding area. (No duct cleaning)
  • Clean all return air grills throughout the home.
  • Inspect the flue assembly and test flue gas drafting mechanism.
  • Test and inspect all furnace safety controls.
  • Test, record, and adjust gas pressure.
  • Replace or clean standard air filters.
  • Lubricate all fan motors and all moving parts.
  • Measure and adjust blower for correct airflow.
  • Clean, level, test, and calibrate thermostat.
  • Measure and record heating system output.
  • Inspect and test thermocouple output, as well as pilot safety switch.
  • Measure and record electrical voltage, amperage and component resistance.
  • Inspect and test all system transformers, relays, contactors and controls. Measure performance.
  • Advise customer on other ways to reduce energy consumption, improve safety and enhance comfort.